27.21-qt
31.09-qt
27.98-qt
27.20-qt
31.97qt
43.68-qt
38.84-qt
29.83-qt
35.66-qt
167.95-gal
49.45-qt
89.15-gal
28.45-qt
484.03-5gal
133.80-gal
45.64-qt
135.65-qt
42.72-qt
135.65-qt
42.72-qt
88.52-gal
94.04-gal.
79.88-gal
128.75-gal
41.55-qt
105.68-gal
35.93-qt
33.01-qt
32.07-qt
92.58-gal
59.05-qt
174.78-gal
88.41-gal
42.72-qt
42.72-qt
141.98-gal
179.98-gal
37.43-qt
45.74-qt
31.73-qt
135.65-gal
High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
Features:
Bleed Resistance: High
Opacity: High
Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
Mesh: 86-240 (34 to 110 threads per cm)
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
Modifications: To reduce viscosity use Curable Reducer, improve stretch use Stretch Additive, for puff use Puff Additive,and extend color use Soft-hand Base.
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
Flashing: 700ºF for 9 seconds, just enough for the surface to be tack free.
Fusion/Curing: 270F - 325F for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390F for 8 seconds.
Wash-up: Any plastisol cleaner.
WMP Non-Phthalate Plastisol Inks
134.78-gal
93.99-gal
107.62-gal
34.91-qt
77.35-gal
86.29-gal
99.37-gal
33.22-qt
77.26-gal
28.18-qt
72.48-gal
27.86-qt
72.95-gal
25.55-qt
42.53-qt
101.22-gal
78.52-gal
150.30-gal
327.14-5gal
134.70-gal
40.92-qt
42.72-qt
Basic Colors
Fluorescent Colors
135.65-gal
135.65-gal
94.04-gal
Metallic Colors
Metallic Gold
Lustre Gold
126.06-gal
48.52-qt
42.72-qt
135.65-gal
159.50-gal
93.47-gal
106.65-gal
36.12-qt
106.07-gal
31.27-qt
32.05-qt
96.85-gal
35.94-qt
92.81-gal
30.39-qt
Glitter Crystallina
55.55-qt
183.81-gal
33.61-qt
109.56-gal
47.12-qt
32.34-qt
101.42-qt
133.93-gal
135.67-gal
41.67-qt
33.80-qt
Glitter Gold
Lustre Silver
Lustre Copper
39.25-qt
34.95-qt
117.25-qt
110.53-gal
34.95-qt
105.73-gal
30.78-qt
Spur Colors
34.95-qt.
34.95-qt.
34.95-qt
Underbase Gray is superb bleed resistance ink, that cures as low as 260 Degrees F. Used as an under base will allow you to print on the most difficult substrates. It has a flat smooth finish for multi-color printing, great stretch ability and improves the feel of the final print.
Underbase
Glitter Silver
NOTE: All Pantone colors matched eye under fluorescent lighting. *Color comes close but not a match
WMP Screen Printing Inks
www.herwecks.com
Serving the San Antonio Art Community since 1948!
