CCI GB2000 Ghost & Haze Remover
A biodegradable haze and image stain remover designed for a large variety of inks. This product contains corrosive
material. Leave on screen five minutes or less. Available in gallons
Imagemate 260 Degreaser
A multi-purpose, concentrated citrus product that does the job of 3 products! This non-abrasive, water-based formula degreases new and used mesh and removes unwanted residue. As a nonflammable ink degrader, it emulsifies inks for easy water removal before reclaiming. Finally, it is a safe, non-caustic screen dehazer that will not deteriorate the mesh and will not burn skin or clothing. Freeze/thaw stable. Available in quarts and gallons.
Shelby's Haze Remover
Specially formulated liquid to remove embedded U.V. and plastisol inks (haze and ghost images) that remain on the screen. Can be left on the screen longer than some of the more caustic haze removers. Available in quarts and gallons
Advantages:
- Biodegradable
- Fast, efficient removal of haze
- Safe when used according to directions
- Low cost per usage
Imagemate Blockout No. 421
Blockout Red 421 is an inexpensive, water-based solution used as a solvent-based ink barrier. This bright red liquid has just the right viscosity to spread easily on to every mesh count. Dry times have been greatly reduced with evaporating agents, yet is non-flammable. Water-soluble, therefore not for use with water-based inks. Available in quarts and gallons
Ulano Blockout No. 60
A water-soluble blockout with drying characteristics similar to Indirect Films. Can be used full strength for touch-
ups or thinned with water if desired. Can be used in unventilated rooms since it contains no organic solvents.
Recommended for use on all fabrics, with all stencil systems. Use only with non-aqueous inks. Blue color.
Available in quarts and gallons.
Blockout Pen
An ultra fast drying
(30 to 90 seconds), water
soluble blockout. Recommended for on or off the press touch-up of direct stencil systems. Resists plastisol, UV, and most solvent based inks. Reclaims with water.
Screen Preparation Chemicals
 | ||||
Ulano No. 10 Blockout
A heavy, non-flammable, water-soluble blockout with drying characteristics similar to Indirect Films.
The high viscosity of Extra Heavy Blockout No. 10 affords easier handling, and generally assures effective coverage in a single coating. Especially useful with coarse mesh. Can be used for touchups when thinned with cold water. Can be used in unventilated rooms since it contains no organic solents. Recommended for use on all fabrics, with all stencil systems. Use only with non-aqueous inks. Available in gallons.
260 Degreaser
21.65-qt.
260 Degreaser
69.45-gal.
Blockout No. 60
37.25/gal.
Blockout No. 10
61.95/gal.
Blockout No.421
16.45-qt.
Blockout No. 421
32.59-gal.
Blockout Pen
9.65
Shelby's Haze Remover
19.95/qt.
Shelby's Haze Remover
58.95-gal
GB2000 Haze Remover
70.85-gal..
Ulano Screen Filler No. 65/Blue
A heavy, non-flammable, water soluble blockout with drying characteristics similar to indirect films. The high viscosity generally assures effective covering in a single coat. Especially good for coarse mesh. Can be thinned with cold water, and used in unventilated rooms. Blue in color, water soluble.
65 Screen Filler
13.95/qt.
www.herwecks.com
Serving the San Antonio Art Community since 1948!
View Cart
Contact Us
