Triangle Plastisol Screen Printing Inks
Triangle Sta-True Series Plastisol Screen Printing Inks
Sta-True 1700 Series plastisol is formulated for printing on polyester and 50/50 polyester/cotton blends for minimal bleed where normal plastisol films would be discolored due to the fabric dyes bleeding into the screen printed film.
Curing: 315 to 330F depending on ink deposit and dryer.
Triangle Tri-Flex Series Plastisol Screen Printing Inks
Tri-Flex 1100 Series plastisol, is formulated for direct wet-on-wet printing of athletic and leisure garments and can also be used for the manufacture of plastisol transfers.For direct prints, knit and woven T-shirts, sweatshirts, jerseys, fleece goods, and bandanna stock may all be used. All popular types of transfer release papers may be used to produce cold peel transfers.
Curing: 315 to 330F depending on ink deposit and dryer.
Triangle N-Series Nylon Mesh Ink
The Nylon Mesh Series is intended for use on nylon mesh jerseys. The Nylon series offers good adhesion and abrasion resistance when properly cured. This product may be flash cured as an under base but must be fully cured to ensure adhesion and wash-fastness. A 150T mesh is recommended. This product may be printed through a range of 86T to 156T meshes.
Curing: 315 to 330F depending on ink deposit and dryer.
