QCM Fluorescent Plastisol Inks - Series QMX
QCM Fluorescent inks are transparent and must be printed on white fabrics or underbased with white ink.
CURING:
Recommended cure temperature is 325 degrees F for 60 to 90 seconds, depending on oven type and thickness of ink deposit.
(Colors shown are approximate)
QCM Fluorescent Plastisol Inks
.
"One Stop Shop For Your Creative Mind"
QCM Opaque Neon Plastisol Inks - Series AP
QCM AP Series inks are more opaque than the fluorescent inks and can be printed on light colored fabrics or underbased with white ink.
CURING:
Recommended cure temperature is 325 degrees F for 60 to 90 seconds, depending on oven type and thickness of ink deposit.
(Colors shown are approximate)
® ArtDoggie is a registered trademark of Herwecks Inc. San Antonio, Texas © Copyright 2006 All rights reserved.
