A fast drying acrylic clear topcoat designed for providing color fade, UV depletion and mild abrasion resistance on printed vinyls and print media. Speed dry UV Acrylic Clears also serve well as edge sealers on multi-layered vinyls, PVc, PVF and metalized polyester films.
Subject to rewetting in extreme heat or when contacted with certain cleaning chemicals, Speed dry UV Acrylic Clears are not recommended for use on vehicle graphics.
T-Cote Primer
A waterborne primer/barrier intended for use on most flexible synthetic favrics including untreated (non-ERC) banner materials, canvas, leather, leatherette, naugahyde and most synthetic awning fabrics.
Ti-Cote makes prepares these otherwise non-enamel receptive surafces ready to paint. Ti-Cote is milky white when applied, but dries clear and is generally ready to paint in 1-2 hours. Gloss finish
1 Shot 6000 Reducer, and 6002 High Temp Reducers act as flow enhancers at normal and high temperatures, respectively.
These products, engineered for use with 1 Shot products, should always be used, as opposed to mineral spirits, turpentine and other less-than-compatible reducing agents.
Available in 32oz.
1 Shot 4007 Hardener not only accelerates the drying times of 1 Shot Lettering Enamels; but enhances adhesion qualities as well. The use of 4007 Hardener also aids in preventing lifting when automotive clears are used over 1 Shot Lettering Enamels. While greatly reducing the workable pot life of your 1 Shot Enamels, adding up to 20% of 4007 Hardener in place of any other reducer, will allow for clear coating withen 12-24 hours.
NOTE: As with all custom paint procedures, test panels should be utilized, and the first two coats of clear should be applied very dry.
Replace cap tightly after use, to prevent crystallization.
Available in 16oz.
A premium product for cleaning your brushes after using 1 Shot Paints, 1 Shot 4004 Brush Cleaner is specifically engineered not to conflict with oil based sign paints.
