Acrylics | Oils | Watercolors | Gouache | Emulsions | Inks | Screens | Squeegees | Heat-Presses | Adhesives | Books | Sign Paints | Portfolios | Vinyl Films | Pastels-Charcoal | Papers | Brushes | Easels | Tables | Lamps | Pens | Markers | Airbrushes | Boards | Canvas | Drawing Pads| Pencils | Projectors
® ArtDoggie is a registered trademark of Herwecks Inc. San Antonio, Texas © Copyright 2006 All rights reserved.
ArtDoggie.com
Contact Us| Shipping Information

4001 Auto Air Sealer White
A low-build sealer used as the initial application of Auto Air Colors. Has excellent coverage and adhesion to primers & prepared surfaces.

Works best with a 0.5mm airbrush operated at 45+ PSI or a 1.2mm tip-sized spray gun operated at 40 PSI.

Tint with 4200 Series Semi-Opaque or Transparent Colors to create a color-keyed sealer base to improve coverage of colors. The mix ratio is not specific. Mix colors approx. 25% per volume to tint sealer.

Dry-sand with 600 – 800 grit paper to create a smoother surface before applying colors.

Excellent adhesion direct to urethane, epoxy and lacquer primers.
Excellent adhesion to existing finishes, prepare by scuffing with 600 grit.
Excellent adhesion to prepared substrates; aluminum, fiber-glass, glass, wood, vinyl and ceramics.

Plastics - use an adhesion promoter first.
Bare, untreated metal – use 4009 DTM Sealer as the sealer coat.

Intended for application with a spray gun or large tip-sized airbrush.

Auto-Air 4000 Additives

.
Shopping Cart]
[My Account]
"One Stop Shop For Your Creative Mind"
Contact Us - 1-800-725-1349
4010 Flash Reducer - Medium Dry
Reducer for the entire Auto Air Colors line.

Improves flow, decreases dry-tip and improves atomization of colors.

Does not accelerate curing times as does 4011 Flash Reducer.

Reduce colors approximately 10% per volume for use with spray guns and 25% or more per volume for use with airbrushes.



4011 Flash Reducer - Fast Dry
Reducer for the entire Auto Air Colors line.

Decreases curing times by assisting water’s evaporation from color through a mild flashing of reducer’s co-solvent.
Improves flow, decreases dry-tip and improves atomization of colors.

Does not accelerate curing times as does 4011 Flash Reducer.

Reduce colors approximately 10% per volume for use with spray guns and 25% or more per volume for use with airbrushes.

For use with small tip-sizes of 0.3mm and less, some colors may be reduced in excess of 100% per volume

4002 Auto Air Sealer Dark
Dark grey sealer with same properties as 4001 Sealer White.

Use as initial coat for dark colors and for 4400 Series and 4500 Series Hot Rod Sparkle and Cosmic Sparkle Colors.

Sealer dark is not a black. Use 4220 Deep Black for black bases.

Silvers - mix Sealer Dark and White to create a lighter grey sealer base for 4100 Series Aluminum bases and 4300 Series silvers.

Intended for application with a spray gun or large tip-sized airbrush.


Spraying recomendations:
Spray-Gun: 1.2mm tip
Mini-Spray Gun: 1.0mm tip
Airbrush: 0.4mm or larger
Reduce: Spray-gun: @ 10% per volume with 4011 Flash Reducer
Airbrush: @ 30% per volume or more with 4011 Flash Reducer

4004 Transparent Base
Colorless base to all Auto Air Colors.

Reduces concentrated 4600 Series Candy Colors.

Use as inter-coat with minimal build. Although not necessary, Transparent Base can be used as a protective inter-coat. Apply in very light amounts when doing so and allow for extended drying time. Inter-coat of Transparent Base over coarse 4400 Series Gem and 4500 Series Hot Rod Sparkle Colors assists top-coat clear in bridging over colors’ pearl-flakes. A little goes a long way when using Transparent Base as an inter-coat clear. Apply it as a drop coat. Do not “paint” it on with any significant build-up of material. Add to colors in any amount to increase transparency.

AA White Sealer 4oz.                 7.89
AA Dark Sealer 4oz.                   7.89
AA Transparent Base 4oz.          5.20
AA White Sealer 16oz.             29.99
AA Flash Reducer Med. 4oz.       6.25
AA Flash Reducer Fast 4oz.        6.25

Qty:
Qty:
Qty:
Qty:
Qty:
Qty: