Actual aluminum-flake colors often used as base for 4600 Series Candy Colors.
Highly reflective – more so than 4300 Series silvers.
Best applied over 4002 Sealer Dark or an underlying coat of Auto Air, not direct to the substrate.
Aluminum Bases are may require a longer period to cure than what is required for most other Auto Air Colors due to coating used to prevent aluminum from gassing.
Use of mid-coat prior to aggressive masking for graphics may prevent peeling.
Mid-coat may be of a urethane inter-coat clear or Auto Air 4004 Transparent Base.
Use of mid-coat may not be necessary, especially if Aluminum Base Colors are thoroughly cured.
Intended for application with a spray gun or large tip-sized airbrush.
Available in 4oz.
Spray-Gun: 1.2mm tip
Mini-Spray Gun: 1.0mm tip
Airbrush: 0.5mm tip or larger
Reduce: Spray Gun @ 10% per volume with 4011 Flash Reducer
Airbush @ 30% per volume or more with 4011 Flash Reducer
